Gravity Roller Conveyor Bench with option electric height adjustment

With Pro-Line's Gravity Roller Conveyor Bench with optional electric height adjustment you can easily load and roll product across the surface, position on the retractable ball transfer and raise the height of the work surface to work at a comfortable height.

Mobile Sorter Bin

Mobile Sorter Bin with locking casters, lamanite work surface and adjustable shelves.

Height Adjustable Down Draft Table with Tilt.

This Height Adjustable Down Draft Table with Tilt, features an HDPE surface to protect the product being worked on. The tilt and height adjustment options, brings the work to the worker.

Mobile Retractable Ball Transfer Table with fixed legs and casters.

With Pro-Line's Mobile Retractable Ball Transfer Table with fixed legs and casters, transporting product through out your plant is a breeze. 25 pounds of pressure on the handle raises 500 pounds on the transfers. Manual operation allows unit to go anywhere.

96" Long hand crank height adjustable retractable ball transfer.

This work bench is a 96" Long hand crank height adjustable retractable ball transfer table, it features a 6 post design with pneumatic pop up ball transfers that raise .250" above surface and lower below the surface when not in use. Also shows split upright and shelf with dividers.

Lab Bench with two sinks

This photograph displays our lab casework with two stainless steel sinks and gray epoxy resin work surfaces, it is made up of two sink bases with removable back to access sink for plumbing.

Electric Height Adjustable Workbench 60" x 36" MVSII

Electric Height Adjustable Workbench 60" x 36" MVSII with two shelves, Mag light, overhead light and footrest. Push button height adjustable work bench adjusts from 30.5" to 42.5".

Push Button Height Adjustable Work Bench

This Push Button Height Adjustable Bench Features Casters, footrest, split uprights, two 36" long metal shelves, deluxe light, flat screen monitor arm, power supply and air quick disconnects.

Fixed Ball Transfer Bench with curved surface

This Fixed Ball Transfer Bench with curved surface, displays Pro-Line's ability to make a work bench to your requirement. If you have an idea and a rough sketch we can help you with your work bench needs.

Ergoline Ergonomic Workbench 48" x 30" with Manual Tilt Option.

This photograph shows our Ergoline Ergonomic hand crank height adjustable workbench 48" x 30" with optional Manual Tilt Option. One hand crank is used to make the work surface height adjustable and the other hand crank is used to tilt the work surface making this workbench truly an ergonomic workbench.

Model HD work bench with Epoxy Resin Surface (lab bench)

Model HD work bench with Epoxy Resin Surface, our catalog and web site displays our model HD with five standard work surface choices, this photograph helps you to remember, all the surfaces we offer are available for the model HD.

Deluxe Lab Cabinet Series laboratory casegoods.

Pro-line has expanded our Prolab section with these Deluxe Lab Cabinets, featuring stainless steel hinges and pulls, sound deadening doors and drawers, adjustable glides accessed through the bottom of the cabinet. Powder coat paint.

Hand Crank Height Adjustable Workbench 96" x 48" with electric tilt.

Hand Crank Height Adjustable workbench with a 60 degree electric tilt with programmable memory. When working on large parts tilting, raising and lowering the part reduces worker fatigue.

Single Sided 60" x 30" Flexline workbench

The single sided Flexline workbench uses a fully welded frame with work surface and optional accessories that cantilever off the frame, shown here with light, power supply, shelf, bin holder and drawer. Work surface adjusts from 30" to 36" high.

Back Light Table with tilt

48" long x 36" deep back light table with optional tilt.

Mail Sorter Work Bench

This photo shows the flexibility of the model HD workbench. Shown here is an HD 72" x 36" with the mail sorter bin, two sets of drawers on either side, pencil drawer in the center and casters.

60" x 48" 2000 pound electric height adjustable bench with tilt

60" long x 48" x 30" to 42" each leg has two hydraulic pistons, this work bench also features , casters, push handle on one end and an 800 pound capacity electric tilt.

Base HD Work Bench

The Base HD workbench includes the left leg, right leg, front rail, 8" back rail, work surface and leveling glides. With our HDLE-6 leg extentions the surface will adjust from 30" to 36" high. This in stock workbench is available to ship in five business days or less.

The Base ELH Height Adjustable Workbench

The Base ELH workbench includes the left leg, right leg, front rail, 8" back rail, work surface, modesty panel, footrest and four post hydraulic system with 750 pounds capacity. This ergonomic workbench is available in multiple sizes.

Base Dimension Next Work Bench

The base dimension next comes with the two solid uprights, two horizontal leg supports, top suport frame with two cantilever brackets front rail and modesty panel, one work surface with 180 degree rolled front edge.

Fixed Ball Transfer Bench

60" x 30" work bench with fixed ball transfers set on a 3" x 6" pattern. Also shown are two footrest and a set of TLC-4 total lock casters that locks both roll and swivel of the caster.

Hand Crank Height Adjustable Enclosure Stand

Hand Crank Height Adjustable Enclosure Stand, do you have a storage or ergonomic problem with out a solution? Call us to help you design the work bench or work platform you require.

Modular Cabinet built to meet your requirement

This photograph shows a cabinet that was built to the customers specifications, the cabinet is mobile with locking casters, has three 3" drawers for tool storage, large area to store tool boxes, tray on one side to hold drawings and folders and three small trays on the other side to hold small tools and parts. The rubber mat on the top protects parts that are laid on the cabinet.

SGK-J2 Standard ESD Ground Kit and Jacks.

When you look at the photograph of the work benches you can see where the ESD ground kit mounts on the bench, but not what is included in the kit. This photograph shows the ground lug, ground lead and the two banana jacks to plug in the wrist strap. shown with mounting brackets for the Flexline and Basics series. On the HD style frame the jacks mount into the front rail.

Enclosed Cabinet Bench with Stainless Steel Surface

This automotive repair shop wanted strong, mobile, secure work benches for their repair bay. They decided on our ECB7230SS Enclosed Cabinet Bench with stainless steel work surface and our TLC-4 total lock casters. With the lockable sliding doors, this bench keeps their tools safe and their shop clean. With the vise and air hose it is extremely functional as well.

Sink Base Painted Textured White

This photograph shows how the Prolab cabinet sink base is open on the top to except your sink in the field. All Pro-line Prolab cabinets feature a removable back panel for easy access to add plumbing and other utilities.

HD Workbench / split upright, deluxe light with parabolic lens.

Shown here is our model HD work bench 60" x 30" x 30" with leg extensions making the surface adjust from 30" to 36" high, split upright, overhead light frame with deluxe light fixture and a parabolic lens. The work surface is white and the frame is painted textured black.

Deluxe Light with parabolic lens

This is a close up of our deluxe light fixture with T-8 ballast and a parabolic lens.

60" x 36" Electric Height Adjustable Work Bench

Our MVSII6036P 60" x 36" height adjustable work bench adjusts from 30.5" to 46.5" with 1,000 pounds capacity, shown with two cantilever shelves, Mag light and holder, power supply, over head light and a fixed footrest.

Basics Model Work Bench with Split Upright

The Basics model work bench can be outfitted with split uprights as shown in this photograph. This model is an ESD work bench with a 90 degree rolled front edge work surface and our standard ground kit with two banana jacks. It is also shown with a 36" long tack board.

Heavy Duty Modular Lab Cabinet with Stainless Steel Hardware

The cabinets, shown here feature sound deadening doors, five knuckle stainless steel hinges, stainless steel wire drawer pulls and an Epoxy Resin work surface. These cabinets also feature adjustable leveling feet that can be accessed from inside the cabinet. Painted textured white.

Height Adjustable Down Draft with Sound Enclosure

Grinding can be loud and dirty, with the optional accessories of a down draft vent and sound enclosure you can reduce noise and dirt. The vented down draft connects to your in house exhaust system, the sound enclosure is insulated to absorb sound.

CHD Textured black with 90 degree ESD gray surface.

Shown here is our Model CHD6030 painted textured black with 6" of adjustment on the surface from 30" to 36", with ESD gray 90 degree rolled front edge surface and ground kit with two jacks for the wrist strap.

Height Adjustable Down Draft Table

Shown on our MVSII platform this work bench features an HDPE work surface with a 12" x 24" down draft section, under the green grate is duct work that runs to 8" diameter duct to easily connect to your internal exhaust system, ideal for grinding applications.

Back to Back HD workbench with shared upright and shelving

Two model HD workbenches back to back with shared upright. The uprights bolts to both benches to keep them together. Shared corrugated shelving saves space. With the model HD's modular design you can easily add additonal shelving, power supply, bin holder's or any accessory that you require to get the job done.

Ergoline with 90 degree rolled front edge and AT-20 Footrest

This mobile ergonomic work bench features hand crank height adjustability, 90 degree rolled front comfort edge, total lock casters, AT-20 ergonomic foot rest, power supply and s deluxe light fixture with a parabolic lens.

ELH 96" long with spilt upright and 90 degree rolled front edge

This work bench is our ELH series four post hand crank height adjustable work bench, at 96" long it offers a large work area, shown are the split upright system, elh-poc casters for the ELH series, light, power supply and the AT-20 foot rest that adjusts with the workbench.

MVSII Electric Height Adjustable Workbench

1,000 pound capacity electric height adjustable work bench with 90 degree rolled edge, AT-20 foot rest, power supply. light and total lock casters that locks both swivel and roll of the casters.

Free Standing Computer Stand

Do you work off your conveyor or perhaps another work platform not a modular work bench? Do you require computers in the process, yet have no place to mount them? This photo displays the freestanding computer stand, with monitor tray, CPU holder, power supply, and articulating work platform. All optional accessories adjustable on the column.

Built in Scale Shelf.

With our built in scale shelf you can avoid lifting heavy products to weigh them. Shown here mounted into a retractable ball transfer, the length and depth of the cut out matches the scale, the steel shelf depth is set to allow scale surface to be flush with the work surface or ball transfer.

Electric Height Adjustable Stainless Steel Work Bench

This photo displays an Electric Height Adjustable Stainless Steel Work Bench. Both the frame and work surface are made from stainless steel with the optional electric hydraulic push button height adjustment.

Heavy Duty Pedestal Work bench

Heavy Duty Pedestal Work bench (PCP) series shown here is the model PCP7230OESD with the left leg, support frame running from the leg to the cabinet, ESD work surface and the optional riser shelf.

Hand Crank Height adjustable table with pull out tray and open drawer

This photo gives you a good view of the pull out shelf as well as Pro-line's steel housing drawer with laminate face and lock. Also shown is the hand crank mounted on the left hand side of the bench (default is right). Contact us to help you configure your work benches.

HD work bench painted green identify ROHS areas

The model HD workbench is flexible and modular and with just a few changes can easily adept to different work environments. Shown here painted green to identify ROHS compliant areas, also shown are Kim wipe holder, solder spool holder, tool holder and the deluxe light mounted under the surface.

32' Long Wire Harness Bench

Are you building long wire harness's? This photograph shows four 8' long wire harness benches that can be bolted together and work in unison. Each bench can be a " master bench or slave bench" We held a .125" tolerance over the 32' length.

2,000 pound weight capacity electric height adjustable bench

Using eight electic hydraulic pistons, this 72" x 30" work bench can lift 2,000 pounds with the push of a button. Our standard ELHE can lift 750 pounds. Are you working with heavy loads? Contact us to see how we can help.

90 degree wire harness work bench

With this modified EL Ergo-line work bench the center of the surface has a 90 degree electric tilt, used with the EL hand crank height adjustment, articulating bin arms and overhead tool suspension frame and balancer, you bring the work to the operator.

Pull Out Printer Tray Mounted to a Lower Shelf

Many companies use large printers in the manufacturing and packaging of their products, many of these printers require access at the top of the printer to reload paper and replace ink. Pro-line’s pull offers two options for these printers, both feature 90% extension slides for easy access to the printer.

Pull Out Printer Tray Suspended From Surface

Many companies use large printers in the manufacturing and packaging of their products, many of these printers require access at the top of the printer to reload paper and replace ink. Pro-line’s pull offers two options for these printers, both feature 90% extension slides for easy access to the printer.

MVSII with pull out printer tray.

This MVSII bench shows the latest in ergonomics, with electric height adjustable surface, ergonomic flat screen monitor arm, pull out printer tray, overhead lighting that slides in / out and pivots,

Push Button Height Adjustable Welding Table

Our ELHE four post electric hydrualic height adjustment option can be added to any four post work bench that we offer. This photo displays our W/HD/ST6036 welding table with this option the unit adjusts via push button from 30" to 42" high.

Dimension Next Black with Shorter Upright

The standard upright for the Dimension Next series is 82.785" high, this photograph shows how you can specify the over all height that you require. And since we do all of our own painting in house you can select from one of six textured powder coat finishes for this model.

Ergoline on casters with pegboard and deluxe light

This Ergo-line work bench shown with optional casters, pegboard, deluxe light fixture, flat screen monitor arm with drop down keyboard displays a great example of a mobile ergonomic work bench, good lighting and your tools can be placed close at hand.

Model HD Black with Wire Rack

This photograph shows how versatile the model HD really is. The picture shows the Model HD painted black with an optional wire rack mounted to the rear upright. Accessory your HD work bench to meet your needs.

Dimension Next Work Bench Painted White

Our web site and catalog mainly shows the Dimension Next painted beige with texture black options, however with all of our work benches you can select the color you require to match your facility. The photo shows the DN painted textured white with an opti

Base Ergoline EL work bench

We are often asked for a photograph of the base EL Ergoline work bench with out the accessories, so here it is. The photo show the base EL6030PL-H11, the building block of a great ergonomic work bench.

96" x 48" Wire Harness Bench

The 96" long x 48" deep Wire Harness Bench with electric tilt and electric height adjustment is ideal for companies working on large heavy wire harnesses. Our standard Model EWH7236 will hold boards up to 96" x 48" but we have been asked in the past to make the platform 96" x 48"" as shown here.